Suspension Components

  

Image Description Part  Number Price

87-2004 Comp. Engineering 3 way adjustable rear shocks
These great bolt on rear shocks can be adjusted for three different settings for Street,Handling or Drag. Direct bolt on!

800385 $129.99/pr
87-04 Comp. Engineering Drag Struts

The perfect balance of street manners and hard track launches! Direct Bolt on!

  • Gas charging reacts faster, elimintes foaming and won't fade like hydraulic designs
  • Computer designed valving for consistent performance under severe racing condiditions
  • Micro-polished 7/8" dia. hard-chrome shaft reduces friction for faster reaction
  • Bolt-In replacement for easy installation

 

 801386 $239.99pr

87-04 Eibach Pro Kit Lowering system
This great kit from Eibach is a direct replacement for the factory ford springs and will give your car that perfect lowered look and performance without bottoming out or riding poorly.

 

 801000 $239.99

87-2004 Lakewood 50/50 Rear Drag shocks
This is a great shock on the street but the drag strip is where they really shine. These rear shocks will work with all rear springs including stock and lowering springs. Gain up to .10 ET in the quarter mile and improve 60ft times greatly!! Direct bolt on, easy install!

 801010 $129.99/pr

87-04 Lakewood 90/10 or 70/30 Front Drag Struts
Launch like a Pro with this great front Strut from Lakewood. Lakewood has combined their experience and the latest technology in drag racing to develop shocks and struts that are superior to all other drag shocks and struts available. They will provide the correct weight transfer on the initial launch, then bring the front-end down quickly for aerodynamic purposes. This transfer will result in lower ETs, and keeps the rear-end loaded for maximum traction.

801020 $259.99pr

Complete Bushing kit for 79-04 Diff. Housing

Get rid of those broken rubber mounts and upgrade to a true bearing system with amazing handling and launch difference you can fee! Recommended for use with above control arms.

  • Constructed from billet aluminum with steel Spherical bearing type insert for rear upper control arm, fits into factory Ford 8.8 axle housing and is also recommended for Competition Engineering No. C8005 Rear Upper Control Arm
  • Eliminates flex and binding, improves handling
  • Provides positive location of rear axle housing
  • Decreases reaction times and 60ft times

 

 800360 $144.99

MMR Tubular K-member for 96-04 Modular

Complete K-Member kit- BOLT on, Strongest, lightest kit available, designed for street, drag and Road race use

 

 808100 $799.99

In stock

Call to order

MMR Tubular K-member for 96-04 Modular
 Great for weight savings, header clearance, turbo kits and 5.4 swaps. Requires A-arms and Front coil over kit, also fits 87-93 for Modular conversions. 96-98 Cobra & 03/04 Cobra requires Oil filter relocation kit

 

 

 

Complete kit shown (coil overs and A-arms not included)

 800100 $349.99

MMR Tubular K-member for 87-95 Pushrod
 

Complete kit shown (coil overs and A-arms not included)

 800150 $349.99

 

MMR Front Coil over kit
Fully adjustable ride height, quality 6061 Aluminum w/ Torrington bearings. Our race team 60ft’s in the 1.29 range with this kit!! Fit all shocks except Billstein. Saves 19lbs. Call to discuss your spring rate or select from the options list by clicking on the shopping cart.

Fits the following Struts:

Stock

Lakewood

Billstein (requires caster/camber plates)

Tokico

Koni

And the following (Gabriel, Monroe, Sensa-Trac)

 800200

 

 

 $189.99

MMR Rear Coil Over kit
This is the same kit that the MMR Race Team uses to run 1.29 60ft times!! These kits are great for Street, Strip, or Handling. The kits are made of 6061 Billet aluminum and High silicone OE spec springs to give accurate rates and prevent sagging over time. The MMR kit offers full height adjustment with the turn of a wrist! Each kit is a direct bolt on and requires NO welding or modification. All spring rates available, call to discuss your application.

Fits the following shocks:

Lakewood

Comp Engineering 3 way adjustable

Koni yellow and red

 

 800275

 

 

 $269.99

MMR Tubular A- arms 94-04
Saves 20lbs, dramatically increases steering response. Includes High Durometer bushings for flex free performance and minimum bind. Saves 20lbs, must be used with coil over kit.		 800300 $279.99

MMR Tubular A- arms 87-93
 Saves 20lbs, dramatically increases steering response. Includes High Durometer bushings for flex free performance and minimum bind. Saves 20lbs, must be used with coil over kit.		 800350 $279.99