Fuel Systems and Parts

 

 

 

                                   

 

 

Image Description Part  Number Price
Fuel Injector Adapters

Adapts NEW or Old Style Harness To OLD or New style Injector (select in shopping cart), Includes Set of eight.

200051 $119.99

INJECTORS

MMR stocks all injector sizes at the best prices, if you do not see your size call! Fits all 87-09 (except Shelby GT 500)  All injectors listed are compatible with factory ECU


 

19lb

 

 

24lb

 

 

30lb

 

 

42lb

 

 

60lb

 

 

75lb

 

 

$279.99

$279.99

$279.99

$399.99

$399.99

$549.99

 

 

Low Impedance Injector Driver
This kit allows you to run Low impedance injectors using your factory computer for ALL 96-05 vehicles. Notice that injectors are only available up to 75lb in the high impedance configuration (this means they will work with a stock computer). With this device you can run ALL injector styles and get enough fuel to feed that beast. This is an easy kit to install and even includes a bypass to revert back to stock. Includes driver, harness and easy to follow instructions.
100560 $449.99

MMR Fuel Pressure Adapter Block for 05-08

This great component from MMR allows you to install a fuel pressure guage (fits all guage manufacturers sensors and fittings) or add a external fuel line for Nitrous wet systems. Includes all components for quick and easy installation! Direct bolt on, no modifications required. Fits all 05-08 models

900998 $69.99

Tank image not avail.

2003-2004 Cobra Fuel Tank w/Dual Pumps

This bolt in fuel tank kit fits 1999-2004 GT and Cobra's and will supply enough fuel to support up to 750HP with no other changes! Direct Bolt in. Kit includes New tank w/twin pumps, fuel level sending unit and wire harness- ready for install.

200050 $1499

MMR Street/Strip 900 Fuel System (NHRA Blue or Black pushlock lines)


Complete system from front to back for 87-08 Mustangs (specify year when ordering). The heart of this system is the ultra quiet and reliable twin external pumps. This system also converts 99-08 Vehicles to a return style but still retains the factory Fuel pressure sensor to keep the ECU happy. 99-04 Vehicles require MMR Pro Tank.

Features Benefits:

* Supports up to 900 RWHP

* -10 Inlet to pumps, -8 feed line, -6 return

*Does Not require Voltage controller

*Quiet design operated just like factory

*Supports up to 900 HP (for 900+ see MMR Tri-Power kit)

*Includes all Lines and fittings for complete install

*Fully adjustable fuel pressure

*Includes easy to follow schematic

When Purchased w/MMR Pro-Tank this system converts all 98-04 returnless Systems to a true return system (fully compatible with ALL factory ECU's)

200100A

86-95 5.0

 

200100B

96-04 GT 4.6

 

20100C

96-98 Cobra

 

20100D

99-01 Cobra/Mach

 

20100E

03/04 Cobra w/all s/c

 

 

$1349

$1349

$1349

$1349

$1349

 

 

MMR Street/Strip 900 Fuel System w/Braided Stainless Steel Hose


Complete system from front to back for 87-08 Mustangs (specify year when ordering). The heart of this system is the ultra quiet and reliable twin external pumps. This system also converts 99-08 Vehicles to a return style but still retains the factory Fuel pressure sensor to keep the ECU happy. 99-04 Vehicles require MMR Pro Tank.

Features Benefits:

* Supports up to 900 RWHP

* -10 Inlet to pumps, -8 feed line, -6 return

*Does Not require Voltage controller

*Quiet design operated just like factory

*Supports up to 900 HP (for 900+ see MMR Tri-Power kit)

*Includes all Lines and fittings for complete install

*Fully adjustable fuel pressure

*Includes easy to follow schematic

When Purchased w/MMR Pro-Tank this system converts all 98-04 returnless Systems to a true return system (fully compatible with ALL factory ECU's)

200150A

86-95 5.0

 

200150B

96-04 GT 4.6

 

20150C

96-98 Cobra

 

20150D

99-01 Cobra/Mach

 

20150E

03/04 Cobra w/all s/c

 

 

$1449

$1449

$1449

$1449

$1449

 

 

500 HP drop in fuel pump system

Fits 2005-2008 Mustang GT


Includes harness, dual fuel pumps, drop in housing and fuel pump driver module from the 2007 Mustang GT500

Fuel flow adequate for nearly 500  Horsepower
 

Includes all installation hardware
 

Highly recommended for any application making over 375hp

MMR Fuel Rails HIGHLY Recommended for applications over 400HP

 

 

900220 $949.99

MMR 800 HP Fuel system for 05-08 GT's

The most complete and well tested fuel system available for your Supercharged or Turbo Charged 05-07 GT's making 400-800 HP. This kit will support up to 800 RWHP and includes the following:

Twin Fuel Pump system with wiring harness and fuel control module (NOT A EXTRA PUMP HOSE CLAMPED TO A FACTORY PUMP HOUSING LIKE INFERIOR BRANDS-see warning below about these imitations)

Stainless Steel 100 Micron Cleanable fuel filter

Billet AN fittings with O-rings for a guaranteed NO LEAK system

MMR Billet Fuel Rails

True Y block design for correct fuel distribution (instead of feeding one fuel rail and then the other like inferior systems, this causes the injector furthest from the fuel pump to run lean causing engine damage)

1/2 (-8) feed line

Complete Install instructions for easy installation

 

THIS IS NOT A FACTORY FUEL PUMP UNIT WITH A EXTRA FUEL PUMP HOSE CLAMPED TO IT LIKE OTHER BRANDS, THIS IS A COMPLETE, BRAND NEW KIT JUST LIKE THE SHELBY GT 500,THE CHEAP IMITATIONS WILL BURN UP YOUR ECU AND FUEL PUMP CONTROL MODULE, USE ONLY GENUINE MMR/FORD RACING BRAND NEW PUMPS AND FUEL CONTROL MODULES!!

900225 $1299.99

MMR Pro Tank
This is the finest sumped fuel tank available with two unique baffles in every tank it is possible to run the the fuel guage to E without damaging or cavitating the fuel pumps!! This tank also increases capacity by 1 gallon. Great for Aeromotive Fuel pumps. Specify year.
200300A

1986-1997

 

200300B

1998-2004

 $449

 

 

$549

500 HP inline fuel pump- 255lph, aluminum body
Includes mounting bracket and fittings, very quiet, great booster pump also up to 100psi
200350 $169.99
  High pressure 255lph intank pump kit all years
Supports up to 550 Rear wheel HP

Available for 1986-97 Return style, 98' Return style with returnless pump and 99-04 Returnless.

200360  $169.99
  High pressure 190lph for 86-97 w/install kit    200370 $139.99
Intank Pick-up & o-ring for 86-97, allows use of external pump 200380  $129.99
Image

not

avail

99-01 Cobra/Mach One Billet Fuel Rails 200381 $239.99
96-98 MMR Billet COBRA fuel rails
Finally a bolt on rail for the 96-98 Cobra, these rails can support up to 1200 HP, includes all hardware and brackets, blue anodized.
100710 $189.99

MMR 2005-2008 Billet Fuel Rails  
These fuel rails are a must to prevent fuel starvation on Supercharged and Turbocharged engines. US made of 6061 Billet aluminum. Prevent your engine from running lean with the finest rails available for you 2005-2008 Mustang . Attaches to factory fuel feed line. Direct bolt on. Dont pay less for a inferior system that will only lean out your car and cause engine damage!

900811B Comes complete to connect to factory fuel line

900811A

 

 

900811B

 

$189.99 (Rails only)

 



$299.99
(including fittings and lines)

Autometer 1.5” Fuel pressure guage for regulator or fuel rail
Available with black or silver face and has 1/8 pipe male fitting.
200400 $39.99
  MMR adapter for above Fuel pressure guage to stock fuel rail pressure port. ALL YEARS 200450  $14.99

Billet EFI stainless element filter (a must when filtering before the pump)
Cleanable stainless element, no more replacing filters! Up to 1500hp, -10 in and out.

200460 $129.99

MMR Universal EFI regulator
35-100psi twin Dual inlets,  single return to tank. 1/8 npt port for guage on front. 1 to 1 boost reference (example: 10 psi boost=10 extra fuel psi on top of base setting) (fittings not included) BRACKET INCLUDED
200470  $129.99
  FUEL FITTINGS
We carry every fitting known to man, Aluminum, brass, steel
  $CALL
  FUEL LINES
We carry steel braided and NHRA approved lines in all sizes
   $CALL

 

  

*Tip- for the less experienced mechanic the pushlock style hose is much easier to

work with, simply cut the hose to length and push onto the barbed pushlock fitting, no clamps or special tools are required. The hoses included in the MMR kits DO NOT EMIT any fuel vapors.